@article { author = {Koupayi Nia, Mohammad Amir and Afzali, Seyed Fakhredin}, title = {Resistance Comparison of Some Mulches Against Heat, Leaching and Pressure}, journal = {Desert Management}, volume = {3}, number = {5}, pages = {53-64}, year = {2015}, publisher = {Iranian Scientific Association of Desert Management and Control (ISADMC)}, issn = {2476-3985}, eissn = {2476-3721}, doi = {10.22034/jdmal.2015.18330}, abstract = {Mulch is one of the most common materials for soil stabilization which prevents wind erosion and dust emissions. In this respect, the sustainability of mulches against corrosive environmental factors is important for selection. In this study, the resistance of some abiotic mulches was examined in simulated desert conditions against pressure by pocket penetrometer at different temperatures. Also, to evaluate the amount of surface leaching, the mulches were tested against spraying water as well. Treatments include 13 types of mulches, nano-polymer mulch, sand, stone powder, sludge and clay soils. Two types of eroded soils including moderate and severe soil erosion and three levels of temperature including ambient temperature, 50 ºC, 60 ºC all of them with  three replications were studied. The results showed that sprayed polymers on severe soil erosion and under both 50 ºC and 60 ºC temperatures had the maximum compressive strength. Also the results of spraying water on the treatments showed that polymeric mulch was more resistant against leaching than others. }, keywords = {waste materials,Environmental factors,Wind erosion,Soil stabilization,Desertification}, title_fa = {مقایسه مقاومت مالچ های غیرزنده در برابر گرما، آبشویی و فشار}, abstract_fa = {استفاده از مالچ یکی از رایج‌ترین روش‌های تثبیت خاک برای جلوگیری از فرسایش بادی و کنترل ریزگرد است. در همین ارتباط، پایداری مالچ‌ها در برابر عوامل فرساینده محیطی می‌تواند در انتخاب ترکیب و نوع مالچ موثر باشد. در این پژوهش مقاومت به فشار (با نفوذسنج جیبی) تعدادی از مالچ‌های غیرزنده در شرایط بیابانی در دماهای متفاوت شبیه‌سازی شد. همچنین برای ارزیابی مقدار شستشوی سطحی، مالچ‌های مورد نظر در برابر پاشیدن جریان آب و رطوبت‌دهی مورد آزمون قرار گرفتند. تیمار‌های تهیه شده شامل 13 نوع مالچ شامل ترکیبات متفاوت از مالچ پلیمری و مالچ‌های مخلوط ماسه، پودر سنگ، لجن کنورتور و خاک منطقه با دانه‌بندی و درصد رس بالا، دو نوع خاک بستر شامل خاک با فرسایش متوسط و شدید و سه سطح اعمال حرارت محیطی یعنی دمای محیط، 50 و 60 درجه سانتی‌گراد در سه تکرار بودند. نتایج بیانگر آن بود که بیشترین تحمل و مقاومت فشاری مربوط به تیمارهای مالچ پلیمری بوده که با خاک با فرسایش شدید بستر سازی شده و تحت تاثیر دماهای 50 و 60 درجه سانتی‌گراد قرار گرفته بودند.همچنین نتایج حاصل از پاشیدن آب به روی تیمارها نشان داد که مالچ‌های پلیمری در برابر شستشو از مقاومت بیشتری برخوردار بودند.}, keywords_fa = {تثبیت خاک,ضایعات کارخانجات,عوامل فرساینده محیطی,فرسایش بادی,بیابان‍زدایی}, url = {https://www.jdmal.ir/article_18330.html}, eprint = {https://www.jdmal.ir/article_18330_18747c1421d33e36fbf3ee56042c8495.pdf} }